How to take care of things?

Laundry, including soaking, pre-washing, rinsing, heating and mechanical action.

bleaching

Ironing and pressing under the influence of heat, a method of restoring the shape and appearance under the influence of an appropriate device.

The sign applied to the symbol means that the product must not be subjected to the processing indicated by the corresponding symbol.

Drying after washing in the machine or other suitable method.

The sign below the symbol means that the product marked with the corresponding symbol must be machined in a soft mode and (or) reduced exposure (for example, temperature, moisture, auxiliary agents.

The product may be subjected to boiling. When machine wash does not need special care. Mechanical action, rinsing without checking the temperature and spinning correspond to the normal program of the machine.

The product can be machine washed at a temperature not exceeding 95°C. Mechanical action, rinsing at a constantly falling temperature and centrifugation correspond to the moderate program of the machine.

The product can be machine washed at a temperature not exceeding 60°C. Mechanical action, rinsing at constantly falling temperature and spinning correspond to the normal program of the machine.

The product can be machine washed at a temperature not exceeding 60°C. Mechanical action, rinsing at a constantly falling temperature and centrifugation correspond to the moderate program of the machine.

The product can be machine washed at a temperature not exceeding 40 ° C. Mechanical action, rinsing at a temperature not exceeding 40 ° C and centrifugation correspond to the normal program of the machine.

The product can be machine washed at a temperature not exceeding 40 ° C. Mechanical action, rinsing and centrifugation correspond to a moderate program of the machine.

The product can be machine washed at a temperature not exceeding 30 ° C. Mechanical action, rinsing and centrifugation correspond to a moderate program of the machine.

Washing should be carried out only by hand at a temperature not exceeding 40 ° C for a short time. During washing, the product should be washed or wrung out only lightly by hand without twisting.

The product must not be washed.

The product may be bleached with chlorine-releasing agents.

The product must not be bleached with chlorine-releasing substances.

Note. It is allowed to use the symbol without specifying Cl.

The temperature of the bottom plate of the iron should be no more than 200 C.

The temperature of the bottom plate of the iron should be no more than 150 C.

The temperature of the bottom plate of the iron should be no more than 110 C.

The product must not be ironed.

Chemical cleaning of the product can be carried out using all common organic solvents.

The product can be chemically cleaned using tetrachlorethylene (perchlorethylene), gasoline, trifluorotrichloroethylene, or monofluorotrichloromethane using conventional cleaning processes.

Dry cleaning requires special care, depending on the solvent used, mechanical stress and drying temperature. The product can be cleaned using tetrachlorethylene (perchlorethylene), gasoline, trifluorotrichloroethylene, or monofluorotrichloromethane with a limited addition of water.

The product may only be chemically cleaned with gasoline or trifluorotrichloroethane using normal cleaning processes.

When dry cleaning, special care is required depending on the mechanical impact and temperature during drying. The product may only be cleaned with gasoline or trifluorotrichloroethane with a limited addition of water.

The product must not be dry cleaned.

The product can be dried in a drum dryer (tumbler). You don't need to be very careful.

A product saturated with moisture should only be fixed for drying.

A product saturated with moisture should be laid out for drying only on a flat surface.